Top
Filter By:
Manufacturer
Show All
Power Source
Sort by:
Page : 1 of 1
Christie 1 Air Torque Wrench Christie 1" Air Torque Wrench Model Number: C-RAD 27A In-use data available The C-RAD 27A Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 27A has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 27A will automatically change to a low speed for final tightening. Compare View Product Christie 1.5 Air Torque Wrench Christie 1.5" Air Torque Wrench Model Number: C-RAD 68 The C-RAD 68 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 1'' Air Torque Wrench Christie 1'' Air Torque Wrench Model Number: C-RAD 27 In-use data available The C-RAD 27 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 1'' Air Torque Wrench Christie 1'' Air Torque Wrench Model Number: C-RAD 46 In-use data available The C-RAD 46 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Christie 3/4'' Air Torque Wrench Model Number: C-RAD 10L In-use data available The C-RAD 10L Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Christie 3/4'' Air Torque Wrench Model Number: C-RAD 1 The C-RAD 1 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to tighten and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Christie 3/4'' Air Torque Wrench Model Number: C-RAD 5 The C-RAD 5 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to tighten and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Christie 3/4'' Air Torque Wrench Model Number: C-RAD 10LNA The C-RAD 10LNA Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool with an integrated nose cone extension designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 10LNA has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 10LNA will automatically change to a low speed for final tightening. Compare View Product Christie 3/4'' Air Torque Wrench Christie 3/4'' Air Torque Wrench Model Number: C-RAD 14 The C-RAD 14 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Christie 3/4'' Air Torque Wrench Model Number: C-RAD 14A The C-RAD 14A Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 14A has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 14A will automatically change to a low speed for final tightening. The reaction force works in the opposite direction to the applied torque. Compare View Product Christie 1'' Air Torque Wrench Christie 1'' Air Torque Wrench Model Number: C-RAD 34 In-use data available The C-RAD 34 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 1'' Air Torque Wrench Christie 1'' Air Torque Wrench Model Number: C-RAD 34A The C-RAD 34A Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 34A has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 34A will automatically change to a low speed for final tightening. The reaction force works in the opposite direction to the applied torque. Compare View Product Christie 1.5'' Air Torque Wrench Christie 1.5'' Air Torque Wrench Model Number: C-RAD 80 The C-RAD 80 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 1.5'' Air Torque Wrench Christie 1.5'' Air Torque Wrench Model Number: C-RAD 115 The C-RAD 115 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie Pneumatic Torque Wrench Christie Pneumatic Torque Wrench Model Number: C-RAD 21 The C-RAD 21 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product
Page : 1 of 1
CONTACT
The Tool Advisor

The Old School,
Main Street,
Awsworth
Nottingham
NG16 2QT

Powered By: Powered By HAVi Total