Powered By:
Christie 3/4'' Air Torque Wrench
Model Number: C-RAD 14
The C-RAD 14 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit.
Compare
View Product
Christie Battery Torque Wrench
Model Number: BC-RAD 5XA
The BC-RAD 5XA Battery Torque Wrench is a hand held, non-impacting battery driven power tool designed to apply torque to tighten and remove threaded fasteners.
The BC-RAD 5XA has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 5XA will automatically change to a low speed for final tightening.
Compare
View Product
ATA Small Angle Sander
Model Number: RA20LR-IMP
In-use data available
ATA Small Angle Sander
Compare
View Product
ATA Medium Right Angle Disc Sander/Grinder
Model Number: RA13-100
In-use data available
ATA Medium Angle Grinder
Compare
View Product
Black & Decker Autoselect® Screwdriver With Screwholder
Model Number: AS36LN
Black & Decker Autoselect® Screwdriver With Screwholder
Compare
View Product
Christie 3/4'' Air Torque Wrench
Model Number: C-RAD 10L
In-use data available
The C-RAD 10L Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners.
The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force.
Torque is controlled by regulating air pressure via a Lubro control unit.
Compare
View Product
Christie 3/4'' Air Torque Wrench
Model Number: C-RAD 5
The C-RAD 5 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to tighten and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit.
Compare
View Product
Christie 1'' Air Torque Wrench
Model Number: C-RAD 34
In-use data available
The C-RAD 34 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit.
Compare
View Product
Christie Battery Torque Wrench
Model Number: BC-RAD 5X
The BC-RAD 5X Battery Torque Wrench is a hand held, non-impacting battery driven power tool designed to apply torque to tighten and remove threaded fasteners.
The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force.
Compare
View Product
Bosch Cordless Drill Driver
Model Number: GSR 18 V-EC
In-use data available
Bosch Cordless Drill Driver
Compare
View Product
Milwaukee 1500w Grinder/Sander
Model Number: AGS 15-125 C
Milwaukee 1500w Grinder/Sander
Compare
View Product
Christie 3/4'' Air Torque Wrench
Model Number: C-RAD 14A
The C-RAD 14A Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 14A has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 14A will automatically change to a low speed for final tightening. The reaction force works in the opposite direction to the applied torque.
Compare
View Product
DeWalt Compact Reciprocating Saw
Model Number: DWE357K
In-use data available
DeWalt Compact Reciprocating Saw
Compare
View Product
Milwaukee M18™ Top Handle Jigsaw
Model Number: M18 BJS-402C
In-use data available
Milwaukee M18™ Top Handle Jigsaw
Compare
View Product
Hilti Angle Grinder
Model Number: DCG 125-S
In-use data available
Hilti Angle Grinder
Compare
View Product
Atlas Copco Pistol Screwdriver
Model Number: LUM 24 HR05
In-use data available
Atlas Copco Pistol Screwdriver
Compare
View Product
Milwaukee M18™ Heavy Duty Sawzall®
Model Number: M18 BSX-402C
In-use data available
Milwaukee M18™ Heavy Duty Sawzall®
Compare
View Product
Milwaukee M12 Fuel™ Compact ⅜˝ Impact Wrench With Friction Ring
Model Number: M12 CIW38-0
In-use data available
Milwaukee M12 Fuel™ Compact ⅜˝ Impact Wrench With Friction Ring
Compare
View Product
Panasonic Cordless Jigsaw
Model Number: EY4541LS1S
Panasonic Cordless Jigsaw
Compare
View Product
Panasonic Cordless Screwdriver
Model Number: EY7411LA1S
Panasonic Cordless Screwdriver
Compare
View Product
The Old School,
Main Street,
Awsworth
Nottingham
NG16 2QT