Powered By:
Makita 190mm Circular Saw
Model Number: HS7100
HS7100 models have been developed as the successor models of the current 5705R series models, featuring compact & lightweight design without riving knife.
Compare
View Product
Makita 125mm Stone Cutter
Model Number: 4101RH
In-use data available
Model 4101RH is sister version of the existing Model 4101R. Model 4101RH complies with CE- regulation. Its brief benefits are; * More endulable and longer life motor. * Equiped with earth leakage breaker on power supply cord.
Compare
View Product
Makita 10mm Rotary Drill
Model Number: 6510LVR
In-use data available
Since the housing is all plastic and possible to control speed,with positive/reverse rotation change function, you can use the electric drill for multi purposes.
Compare
View Product
Makita 6mm Die Grinder
Model Number: GD0600
In-use data available
Model GD0600 has been developed with the design concept of "Easy-to-handle die grinder", featuring; Paddle type On/Off switch and easy-to-grip small circumference housing.
Compare
View Product
Makita 8mm Die Grinder
Model Number: GD0800C
In-use data available
High speed die grinder with maximum 8mm collet capacity. Internal labyrinth construction seals motor and bearings from contamination.
Supplied with 6mm collet cone.
Compare
View Product
Makita 10mm Rotary Drill
Model Number: 6413
In-use data available
Models 6413 are cost-competitive 10mm Drills, featuring compact and lightweight design yet with high durability.
Compare
View Product
Makita SDS-Max Demolition Hammer
Model Number: HM0870C
In-use data available
High durability and excellent demolition performance. Adapted for SDS-MAX bits.
Compare
View Product
Makita 10mm Angle Drill
Model Number: DA3010F
In-use data available
DA3010 models are the high power version of the predecessor model DA3000R, and you can enjoy speedy work comparing with the competitors' products. Equipped with 450W high power motor and built in LED job light.
Compare
View Product
Makita 260mm Flip Over Saw
Model Number: LF1000
Model LF1000 is the first flip over saw from Makita. Mitre saw and Table saw are combined for great versatility.
Its main advantages are; Weighs only 32kg (70lbs) for easy transport to job sites. Quick mitre saw/table saw conversion. Electronic with constant speed control and soft start. Rigid cast aluminum table.
Compare
View Product
Makita 28.6mm Hex AVT Demolition Hammer
Model Number: HM1317CB
High durablity and excellent demolition performance. Anti vibration technology ensures extra-low vibration performance. Suppression of motor speed during no-load reduces vibration of tool body.
Compare
View Product
Makita 13mm Percussion Drill 2 Speed
Model Number: HP2071F
High power in slender and compact body with durable metal gear housing (with keyless chuck).
Compare
View Product
Makita 13mm Percussion Drill 2 Speed
Model Number: HP2050
In-use data available
Makita's 700W class hammer drills with extra low vibration level, yet with superior working performance. The features and benefits are : * Slim and smart shape hammer drills, yet loaded with torque limiter. * Extra-low vibration level for comfortable and less fatigue operation *Equipped with keyless drill chucks.
Compare
View Product
Makita 13mm Percussion Drill
Model Number: HP1640K
Dual puropse for "Rotation only" and "Rotation with hammering." New reversing system allows extended service life of carbon brush; no power reduction even in reverse rotation. K model complete with plastic carrying case.
Compare
View Product
Makita 1/2" Impact Wrench
Model Number: TW0200
In-use data available
The TW0200 1/2 in. Electric Impact Wrench provides high torque (150 ft.-lbs) and an effective impact system (2,200 IPM) for the most demanding jobs. The 3.3 AMP motor has an efficient impact system which creates less vibration and minimizes operator fatigue. The compact design and rubberized grip provides increased comfort during use. The all metal gears are protected by an aluminum gear case and rubber boot to increase product life. Brushes are externally accessible for easy inspection and replacement.
Compare
View Product
Makita Jig Saw
Model Number: 4350CT
In-use data available
Models 4350CT have been developed as the successor models of 4340T series models. In addition to the advantages of the predecessor models, feature new exterior design with ergonomic rubberized handle
Compare
View Product
Makita Jig Saw
Model Number: 4329
In-use data available
These models have been developed as the successor models of 4322 series. In addition to the advantages of the predecessor models, 4329 series models feature the following benefits: *New exterior design and ergonomic handle with rubberized soft grip. *Change lever for 3 orbital settings and straight cutting.
Compare
View Product
Makita 260mm Slide Compound Mitre Saw
Model Number: LS1016
LS1016 are upgraded sister tools of LS1013 series models, featuring DXT (Deep eXact cutting Technology).
The features and benefits of DXT are: *Deep cutting. *3-Stage reduction gear unit and Movable rear blade guard provide larger capacities of cutting Crown molding and Baseboard (Skirt board) which are typical workpieces of slide compound mitre saws.
Compare
View Product
Makita 260mm Mitre Saw
Model Number: LS1018L
In-use data available
Large cutting capacity, bevel cutting at 45 degrees left and right.
Compare
View Product
Makita 305mm Slide Compound Mitre Saw
Model Number: LS1216
LS1216L are upgraded sister tools of LS1214 series models, featuring DXT (Deep eXact cutting Technology.)
The features and benefits of DXT are: *Deep cutting *3-Stage reduction gear unit and Movable rear blade guard provide larger capacities of cutting 203mm (8") Crown molding leaning against fence and Baseboard (Skirt board) which are typical workpieces of slide compound saws.
Compare
View Product
Makita 305mm Slide Compound Mitre Saw With Laser
Model Number: LS1216L
In-use data available
LS1216L are upgraded sister tools of LS1214 series models, featuring DXT (Deep eXact cutting Technology.)
The features and benefits of DXT are: *Deep cutting *3-Stage reduction gear unit and Movable rear blade guard provide larger capacities of cutting 203mm (8") Crown molding leaning against fence and Baseboard (Skirt board) which are typical workpieces of slide compound saws.
Compare
View Product
The Old School,
Main Street,
Awsworth
Nottingham
NG16 2QT