Chicago Pneumatic Tamper Model Number: MS 780 (280 mm) In-use data available With a forward-leaning design, the MS 595 and MS 695 offer superior control of the tamper, allowing users to walk-behind while the momentum carries the tamper forward. Additional features such as the easy-access control lever enable the operator to switch to idle with just one hand. The compact, slim line design make the new tampers ideal for narrow trench work with the ability to tightly move around objects. Compare View Product Makita 75.6cc 4-Stroke Blower Model Number: EB7660TH EB7660TH is Makita’s most powerful petrol blower, equipped with 75.6cc 4-stroke engine in compliance with strict exhaust emission regulations. Compare View Product Chicago Pneumatic Breaker Model Number: RED HAWK RAIL The Red Hawk Rail offers the right power and high blows per minute for effective tie tamping. It’s compact and portable enough for a single operator to carry it on and off the tracks. In addition, the Red Hawk Rail is gasoline-driven, so there’s no need for an access road along the rail lines to bring in a compressor, generator or power pack. Compare View Product Chicago Pneumatic Pneumatic Breaker Model Number: CP 1210 In-use data available Used in light to medium construction, utility and plant maintenance work such as light demolition of oors, pavements and road surfaces as well as various other service jobs. They are also often found on bridge deck jobs. Compare View Product Chicago Pneumatic Pneumatic Breaker Model Number: CP 1210 S In-use data available Used in light to medium construction, utility and plant maintenance work such as light demolition of oors, pavements and road surfaces as well as various other service jobs. They are also often found on bridge deck jobs. Compare View Product Chicago Pneumatic Pneumatic Breaker Model Number: CP 1210 SVR In-use data available Used in light to medium construction, utility and plant maintenance work such as light demolition of oors, pavements and road surfaces as well as various other service jobs. They are also often found on bridge deck jobs. Compare View Product Honda Leaf Blower Model Number: HHB 25 E In-use data available Honda Leaf Blower Compare View Product Husqvarna Chainsaw Model Number: 242XP In-use data available Husqvarna Chainsaw Compare View Product Billy Goat 30'' Hydro Aerator Model Number: AE1300H This machine combines true 30" wide aeration and speed up to 4.3 mph to complete 1/4 acre in as little as 15 minutes! That's 59% faster than a 26" drum! Plus no more lifting on turns; aerate in reverse; do trim and edges with ease; and significantly improve hole quantity and quality vs. drum aerators. Compare View Product Billy Goat KV Multi-Surface Residential / Light Commercial Model Number: KV600 In-use data available Powerful suction and easy operation make cleanup a snap for leaves, seeds, mulch, blooms, branches, litter and debris. The 27” wide lawn and litter vacuum is ideal for residential and property maintenance and builds on our 40 year legacy of strong suction, simple operation and reliable design that makes outdoor vacuum cleanup a snap. Compare View Product Billy Goat Quietvac Contractor (Hard Surface) Model Number: QV550 In-use data available Noted as the “World’s Quietest”. Billy Goat’s new 33” QUIETVAC™ touts the lowest noise level in its class and features unique cyclonic filtration, along with exclusive dust sock technology that dramatically reduces dust in dry conditions, and takes our industrial class hard surface unit to the next level. The unit replaces our legacy VQ series and is ideal for wide area commercial, industrial and municipal cleanup applications such as tarmac, school grounds, hospitals, hotels, parks, churches, airport pedes Compare View Product Atlas Copco Tie Tamper Model Number: Cobra TTe In-use data available The Cobra™ TTe is optimized for railway applications and especially designed for tie tamping. It works at the relatively high frequency of 1,620 blows/min. Its impact energy is high enough to push the ballast back under the ties and low enough to prevent pulverization of ballast. The petrol-driven breaker is ideal for tie tamping in more ways. Compare View Product Etesia Duocut 53 Model Number: LKCGM In-use data available The new Etesia Duocut 53 mower is the big brother of the Duocut family. A wider cutting width, more powerful engine and more robust make it ideal for large areas and landscape contractors. Compare View Product Stihl Entry Level Straight Shaft Brushcutter With Loop Handle Model Number: FS 55 R In-use data available Low weight compact brushcutter, with loop handle for difficult terrain and confined conditions. Functional modern design with excellent balance. Comes standard with AutoCut line head. Compare View Product Stihl Strimmer Model Number: FS 45 In-use data available With simplified starting system, for mowing smaller grass areas. Compact, powerful and lightweight grass trimmer, easy to handle for domestic trimming and lawn edging. Compare View Product ICS Petrol-Powered Concrete & Utility Pipe Chain Saw Model Number: 695XL In-use data available The 695XL features include an easy to start engine with higher energy ignition system and durable, long-lasting components including a new muffler, carburetor and piston & cylinder. Available with 12-inch (30 cm) - 16-inch (40cm) guidebars and the entire line of MAX, ProForce and PowerGrit series diamond chains. Based on the best-selling 695 saw platform, the 695XL is the highest horsepower ICS gas saw for frequent-use by general construction, utility contractors and concrete professionals. Compare View Product ICS Petrol Powered Utility Chain Saw Model Number: 680ES-PG Built to provide a combination of performance and portability for cutting in-ground utility pipe, the 680ES-PG petrol powered utility chain saw with PowerGrit chain will change the way to cut pipe. This affordably priced petrol powered saw, allows you to cut up to 10" deep from one side into ductile iron, cast iron, PVC, HDPE and Insituform lining and is also designed to run the full line of MAX series chains. With a quick switch of guidebar, chain and drive sprocket, you have the ability to use this saw in Compare View Product Stihl Compact And Robust 3.2-kW Cut-Off Saw Model Number: TS 420 In-use data available Compact and robust, the STIHL TS 420. Long-life filter system with cyclone pre-separation makes on site maintenance unnecessary. Extremely low vibration levels (3.9m/s²). High performance engine with stratified charge system. Compact design and optimised balance for excellent cutting and guide characteristics. For use with 350mm cutting wheel. ElastoStart, primer pump and decompression valve. Bayonet filler cap for tool free opening. Compare View Product Ammann Rammer Model Number: ACR 60 In-use data available The ACR 60 is the lightest of the Ammann Rammers, with a weight of 62 kg. It is used when a little less weight is sufficient – especially in particularly tight spaces. Like all Ammann Rammers, the handle is key to the success of the ACR 60. It offers high production while limiting the vibration levels that reach the operator and, of course, enables maneuverability. Compare View Product Ammann Rammer Model Number: ACR 68 The ACR 68 is the rammer of choice for contractors who need heavier compaction yet also prefer a machine with a petrol engine. The rammer, with a weight of 68 kg, is equipped with a Honda GX100, 4-stroke petrol engine that is powerful, prevents fluid spills when on steep grades and meets all global emission standards. The ACR 68 also is offered with the Honda GXR120 petrol engine, which provides the same benefits as the GX100 but adds more power with lower immissions. Compare View Product