Christie 1" Air Torque Wrench Model Number: C-RAD 27A In-use data available The C-RAD 27A Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 27A has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 27A will automatically change to a low speed for final tightening. Compare View Product Christie 1.5" Air Torque Wrench Model Number: C-RAD 68 The C-RAD 68 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 1'' Air Torque Wrench Model Number: C-RAD 27 In-use data available The C-RAD 27 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 1 The C-RAD 1 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to tighten and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 1'' Air Torque Wrench Model Number: C-RAD 34 In-use data available The C-RAD 34 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 10L In-use data available The C-RAD 10L Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 1'' Air Torque Wrench Model Number: C-RAD 34A The C-RAD 34A Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 34A has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 34A will automatically change to a low speed for final tightening. The reaction force works in the opposite direction to the applied torque. Compare View Product Christie 1.5'' Air Torque Wrench Model Number: C-RAD 80 The C-RAD 80 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 10LNA The C-RAD 10LNA Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool with an integrated nose cone extension designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 10LNA has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 10LNA will automatically change to a low speed for final tightening. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 14 The C-RAD 14 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 14A The C-RAD 14A Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 14A has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 14A will automatically change to a low speed for final tightening. The reaction force works in the opposite direction to the applied torque. Compare View Product ATA Medium Right Angle Disc Sander/Grinder Model Number: RA13-100 In-use data available ATA Medium Angle Grinder Compare View Product Ingersoll Rand 1/2'' Impact Wrench Model Number: 231GXP In-use data available The gold standard of the automotive service industry now delivers Extra Performance, as part of the exclusive new XP Series of tools. With increased durability, through-handle exhaust, quieter operation,improved throttle control and a countered rubber grip for superior comfort, the 231GXP is a MUST have for every automotive service industry professional! Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 5 The C-RAD 5 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to tighten and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product ATA Small Angle Sander Model Number: RA20LR-IMP In-use data available ATA Small Angle Sander Compare View Product Atlas Copco Pistol Screwdriver Model Number: LUM12 HRX8-RE In-use data available The LUM12 HRX is the workhorse of our pneumatic screwdriver line-up! This tool combines the best engineering, continuously refined and improved, to bring you superior ergonomics, durability and productivity. Compare View Product Atlas Copco Pneumatic Screwdriver Model Number: LUM12 PR5 In-use data available The LUM12 PR is the workhorse of our pneumatic screwdriver line-up! This tool combines the best engineering, continuously refined and improved, to bring you great durability and productivity. Compare View Product Ingersoll Rand Extended Straight Grinder Model Number: M2X180RG4 All-new M2-series extended straight grinders take power, versatility, and low maintenance requirements to even hard-to-reach places. They're the easy-to-use, longer-lasting tools that work harder for you. Compare View Product Atlas Copco Pistol Screwdriver Model Number: LUM 24 HR05 In-use data available Atlas Copco Pistol Screwdriver Compare View Product Atlas Copco Pneumatic Screwdriver Model Number: LTV009 R05-6 The LTV009 model is the smallest pneumatic angle screwdriver in our range. Its angle head can reach in to all those cramped spaces where you can’t fit a pistol grip tool... Compare View Product