Clarke Air Shear Model Number: CAT126 In-use data available The CAT126 is a great value air shear, manufactured for rapid, accurate and efficient cutting of sheet metal. Operating at 1800 strokes per minute, the CAT126 is suitable for light to medium duty DIY applications and can be used to cut mild steel up to 1.4mm thick. Compare View Product Clarke 3" Air Cut-Off Saw Model Number: CAT99 In-use data available This high speed miniature disc cutter is ideal for use in confined spaces such as the awkward recesses of motor vehicles. Cuts quickly and cleanly through metal, plastic and similar materials. Compare View Product Clarke High Speed Air Sabre Saw Model Number: CAT32B High speed air sabre saw, ideal for cutting body panels, exhausts, plastics etc. Compare View Product Clarke X-Pro - Professional ¼” Air Die Grinder Model Number: CAT128 In-use data available Professional 1/4" Air Die Grinder - This versatile high speed air grinder is suitable for use with a wide range of abrasive stones. With a compact design it is well suited to working in confined spaces. XPro air tools are a superb new range of top quality professional tools built for tough daily use in garages. Compare View Product Christie 1" Air Torque Wrench Model Number: C-RAD 27A In-use data available The C-RAD 27A Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 27A has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 27A will automatically change to a low speed for final tightening. Compare View Product Christie 1'' Air Torque Wrench Model Number: C-RAD 46 In-use data available The C-RAD 46 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 10L In-use data available The C-RAD 10L Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 1 The C-RAD 1 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to tighten and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 5 The C-RAD 5 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to tighten and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 10LNA The C-RAD 10LNA Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool with an integrated nose cone extension designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 10LNA has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 10LNA will automatically change to a low speed for final tightening. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 14 The C-RAD 14 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 14A The C-RAD 14A Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 14A has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 14A will automatically change to a low speed for final tightening. The reaction force works in the opposite direction to the applied torque. Compare View Product Christie 1'' Air Torque Wrench Model Number: C-RAD 34A The C-RAD 34A Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 34A has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 34A will automatically change to a low speed for final tightening. The reaction force works in the opposite direction to the applied torque. Compare View Product Christie 1.5'' Air Torque Wrench Model Number: C-RAD 80 The C-RAD 80 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Huck Rivet Puller Model Number: LH-224 In-use data available The Huck® LH-224 pneudraulic installation tool is a lightweight, high-speed production tool, designed to install lockbolts such as Magna-lok®, C6L® and Magna-Grip@ up to 6.4mm (1/4”) and structural rivets up to 6.4mm (1/4”). It is simple and reliable and has been a popular tool in Australia and New Zealand for many years. The tool-head accepts a wide range of nose assemblies (sold separately) which can be quickly and easily changed to suit rivets and lockbolts from most manufacturers. Compare View Product Allfast Rivet Puller Model Number: RV30GD In-use data available Allfast Rivet Puller Compare View Product American Pneumatic Tools Paving Breaker Model Number: 117 American Pneumatic Tools Paving Breaker Compare View Product Atlantic Airtool Co Alligator Squeezer Model Number: 30A15HD In-use data available Atlantic Airtool Co Alligator Squeezer Compare View Product Avdel Power Riveter Model Number: 7555 Avdel Power Riveter Compare View Product Bardolph Aircraft Tools Riveting Hammer Model Number: 4X In-use data available Bardolph Aircraft Tools Riveting Hammer Compare View Product